Cords to Upload Canon Camera Videos to Computer
Description
Transferring video recordings to and from a computer XH A1S and XH G1S
Solution
Transferring Video Recordings to and from a Computer
You tin transfer recordings to and from a computer using the IEEE1394 (DV) terminal.You tin can also apply this camcorder to transfer through it recordings from an analog VCR or 8 mm camcorder to your computer using the AV terminal (analog / digital converter feature (SD only)).
Earlier starting the video transferring, make sure to prepare the following:
- A calculator equipped with a IEEE1394 (DV) final or a IEEE1394 (DV) capturing board (the IEEE1394 protocol is ofttimes besides called "Firewire" or "iLink").
- A DV/HDV cable (sold separately)
- Video Editing Software
You can use (1) the video editing software that came bundled with your computer or video capturing board, (2) the video editing software included with your operating arrangement ("Windows Movie Maker" with Windows seven*, Windows Vista Home Premium*, Windows Vista Ultimate*, Windows XP and Windows ME, "iMovie" with Mac OS nine and subsequently, iMovieHD* latest versions of iLife), or (3) video editing software purchased separately, with features ranging from very basic to very sophisticated.
*These applications back up transfer of high definition video.
- The appropriate driver
A driver is included with Windows operating systems later than Windows 98 Second Edition and Mac operating systems later than Mac Os nine. The driver is installed automatically when you connect the camcorder to the computer. No additional driver is necessary or bachelor.
- Start your computer.
(If this is the first time you are connecting the camcorder to your Windows based computer your estimator volition display the "New Hardware Found" bulletin while the commuter is installed automatically.)
- Set the camcorder to
mode.
- In the camcorder's indicate setup menu, cheque the [AV> DV] setting.
- If you want to transfer your recordings from the tape, edit the video on the computer and record information technology back on the tape, set [AV>DV] to [OFF]. If you want to catechumen an analog recording to digital, set up [AV>DV] to [ON].
Note: [AV>DV] Converter functions only in DV standard way. HDV recording is non possible.
- Connect the camcorder to the computer with the DV cable as shown below. In one case the camcorder and figurer are connected together the camcorder will display "DV IN" on the LCD/viewfinder. This message confirms that the camcorder is fix to receive or transfer video.
- Refer to the instructions for your video editing software to download your video from the camcorder.
Annotation: Because procedures for digital editing software applications vary profoundly, Catechism cannot offering any additional support or suggestions regarding downloading and editing your video. Please refer to the software publisher or your figurer manufacturer (if the software came with your computer) for assistance in using the software.
- Operation may not work correctly depending on the software and the specifications/settings of your figurer.
- If the computer freezes while you accept continued the camcorder, disconnect and reconnect the DV cable. If the trouble persists, disconnect the interface cable, turn off camcorder and figurer, plough camcorder and reckoner back on and reconnect them.
- Before connecting the camcorder to the computer using a DV cable, make sure that no other 1394 device is continued to the estimator.
- Nosotros recommend powering the camcorder from a household power source while information technology is connected to the computer.
- Refer also to the education manual of the calculator.
- The programs ZoomBrowser EX and Image Browser included with the supplied CD-ROM are intended for use but with images recorded on the memory card.
- Video recordings on the tape cannot be transferred to the estimator using the software included with the supplied CD-ROM.
Source: https://support.usa.canon.com/kb/index?page=content&id=ART132235
0 Response to "Cords to Upload Canon Camera Videos to Computer"
Post a Comment